Scanmar International Press
Scanmar Announces the Launch of its new “E-Rudder” Emergency Rudder System for the Monitor Windvane
San Leandro, CA — September 8, 2020
Scanmar International, Inc. has announced the delivery of its new E-Rudder Emergency Rudder System, which converts a vessel’s existing Monitor Windvane wind steering system to an autonomous emergency rudder, completely independent of the boat’s wheel or tiller steering which may have become damaged. The E-Rudder System utilizes the existing Monitor Windvane’s legendary stout mounting structure, and allows the mariner to quickly install a larger steering rudder OVER the existing Monitor water paddle.
In an emergency, the E-Rudder is attached to the Monitor servo pendulum blade and is held in place and an ingenious system of adjustable Dyneema bracing lines. Once installed, the E-Rudder can then steer the boat to safety via three different methods:
-
Hand steered by moving the Monitor vane’s existing counter weight linkage. Adjustable lines can be led to the linkage to allow steering from virtually anywhere in the boat.
-
The Monitor Windvane’s existing large light air airvane can be used to steer the E-Rudder as a wind-powered emergency rudder.
-
A small electronic tiller pilot, such as Scanmar’s Pelagic Autopilot can be attached to the Monitor’s gearset and will steer a magnetic compass course home. Because of the leverage of the linkage, the average power draw of this system is about 1/10th of that of a typical electric autopilot, and important consideration in an offshore emergency.
“This new E-Rudder System is a breakthrough for the offshore sailor in terms of both durability and affordability. Monitor Windvanes are known as being pretty “bullet proof”, and now this framework also serves as the platform for the emergency rudder”, said Mike Scheck, President of Scanmar. “The E-rudder system will retail for $1,195. Combine that with an efficient tiller pilot like our Pelagic Autopilot, and you’ve got a fully autonomous electric and/or wind powered get-home set up for about $2,000.”
“Another advantage to the E-Rudder System is its stowability”, said Scheck. “The entire system fits into a zippered valise which will stow flat in the vessel. That compares very well to other systems that take up a lot of valuable space.”
Each E-Rudder Emergency Rudder System is designed, built, and tested in the U.S. in Scanmar’s San Leandro, CA facility. The new system is constructed of stainless steel.
E-Rudder Emergency Rudder Systems are ready to ship.
About Scanmar International
Scanmar International has been providing products for the long-distance sailor since 1977. Its product line offers high quality cruising gear for both power and sail.
Scanmar is headquartered in San Leandro, California.
Website: http://scanmarinternational.com
Scanmar Announces the Launch of its Redesigned AnchorRescue® System, “AnchorRescue II”, which Allows Boaters to utilize the Same Anchor Recovery device for different sized Anchor Chains. Device receives Patent Pending Status.
San Leandro, CA — September 16, 2019
Scanmar International, Inc. has announced the delivery of its redesigned AnchorRescue II anchor recovery system, which allows sail boaters and power boaters to recover their anchors that may have become tangled in the seabed. A revolutionary design breakthrough allows one AnchorRescue II device to be used on any size anchor chain ranging from 1/4” to 3/8”. Now, one AnchorRescue II system can be switched from one anchor to another, or even moved from boat to boat.
“The original AnchorRescue models were designed to fit a specific chain size. Our new kits are based on a design which accommodates the most commonly used chain sizes. Separate devices are available for larger chain sizes”, said Mike Scheck, CEO of Scanmar International. “This improves on a proven product, five years after the original design was delivered.”
The AnchorRescue II has received patent pending status from the U.S. Patent and Trademark Office, validating its unique ability to retrieve a boat’s ground tackle.
“This device provides an added layer of safety to boaters by saving the boat’s primary (and usually largest) anchoring system, eliminating the need to utilize the vessel’s secondary, often lighter backup ground tackle”, said Scheck. He also emphasized the value of being able to retrieve a fouled anchor. “Anyone who’s had to try to replace a large ground tackle system in a remote location knows it can be incredibly expensive if not impossible to do”.
Each AnchorRescue II anchor recovery system is designed, assembled and tested in the U.S. in Scanmar’s San Leandro, CA plant. The new system is constructed primarily of stainless steel.
AnchorRescue II systems are available now. The product will be demonstrated at upcoming boat shows, including Southampton, Annapolis, and METS. Dealer inquires welcome.
About Scanmar International
Scanmar International has been providing products for the long-distance sailor since 1977. Its product line offers high quality cruising gear geared to both power and sail.
Scanmar is headquartered in San Leandro, California.
Contact:
Mike Scheck
President
510-215-2010
Scanmar Acquires the Pelagic Autopilot from Pelagic Autopilot, LLC
San Leandro, CA – January 14, 2019
Scanmar International, Inc. today announced it has acquired the Pelagic Autopilot from Pelagic Autopilot, LLC. As part of the agreement, Scanmar will also assume support for existing Pelagic customers. Formerly headquartered in Los Gatos, CA, Pelagic Autopilots have been well received by both sail and powerboaters worldwide.
“We look forward to the addition of the Pelagic Autopilot to our product portfolio.” says Mike Scheck, President of Scanmar. “The advanced features and robust construction of the Pelagic system have proven popular with racers and cruisers. All at an attractive price point.”
The deal, terms of which were not disclosed, closed on January 11, 2019.
About Scanmar International
Scanmar International has been providing products for the long-distance sailor since 1977. Its product line offers high quality cruising accessories geared to both power and sail.
Scanmar is headquartered in San Leandro, California.
Contacts:
Mike Scheck
President
510-215-2010
Scanmar and Croix du Sud Marine, France Team-up to Offer the World’s Leading Anchor Recovery System, the AnchorRescue
San Leandro, CA – March 22, 2016
Scanmar International is excited to announce an agreement with Croix du Sud Marine to represent its anchor recovery gear for the cruising community in France, the Mediterranean basin, and Switzerland.
“We're excited by the opportunity for our customers to purchase Scanmar’s AnchorRescue system directly in France, the Med, and Switzerland and receive expert support from Croix du Sud Marine. Our two companies share a common business philosophy of providing the highest quality gear plus an unwavering commitment to deliver the best customer service in the industry. We look forward to working with and the Croix du Sud Marine team”. As accomplished and passionate sailors with extensive cruising experience, Pascale and Gerard Pascal bring a wealth of knowledge to their customer-base along with expert advice and local knowledge", says Mike Scheck, Scanmar’s President.
For more information, please contact us at:
Scanmar International
14138 Washington Ave
San Leandro, CA USA 94578
tel: 510.215.2010
Email scanmar@selfsteer.com
Visit our Websites at: http://www.selfsteer.com, and http://www.anchorrescue.com
Croix du Sud Marine
Tél : 06 41 76 01 74 ou 04 50 56 37 19
E - Mail : contact@croixdusudmarine.com
Site : www.croixdusudmarine.com
Scanmar International and Garhauer New Zealand Team-Up to Provide Monitor Windvanes Down Under
Richmond, CA – July 15, 2015
Scanmar International has announced an agreement with Garhauer New Zealand to represent its full line of windvane self-steering systems, emergency rudders, and anchor recovery gear to the cruising community Down Under.
“We're excited by the opportunity for our customers to purchase Scanmar products directly in New Zealand and receive expert support by Garhauer New Zealand. Our companies share a common business philosophy of providing the highest quality gear and an unwavering commitment to deliver the best customer service in the industry”, says Mike Scheck, Scanmar President.
“We look forward to working with Kevin Akast, Kathy Hutton and the entire Garhauer New Zealand team. As an accomplished sailor with extensive Monitor windvane experience, Kevin will be a tremendous resource to our customers in that part of the world”.
For more information, please contact:
Scanmar International
432 South 1st Street
Richmond, CA USA 94804-2107
510.215.2010
Email scanmar@selfsteer.com
www.selfsteer.com and www.AnchorRescue.com
Garhauer Marine New Zealand
Kevin Akast or Kathy Hutton
64.9.4026231
Email sales@garhauer.co.nz